DigistumpMirror/DigistumpArduino
1
0
Fork 0
mirror of https://github.com/digistump/DigistumpArduino.git synced 2025-09-17 17:32:25 -07:00
Code Issues Actions Packages Projects Releases Wiki Activity

Add OLED library - update tiny wire libraries - add support for all PWM channels and PWM on pin 8

Browse Source
This commit is contained in:
Erik Tylek Kettenburg
2015-01-14 18:08:45 -08:00
parent fb93846380
commit 52f444d221
60 changed files with 3285 additions and 710 deletions
Download Patch File Download Diff File Expand all files Collapse all files

64
hardware/digistump/avr/libraries/DigisparkSoftSerial/Readme.md Normal file
View File

@@ -0,0 +1,64 @@
SoftSerial library
==================
The **SoftSerial** library is exactly the same as the **SoftwareSerial** library but used with the **TinyPinChange** library which allows to share
the "Pin Change Interrupt" Vector.
**SoftwareSerial** monopolizes the Pin Change Interrupt Vector and do not allow sharing.
With **SoftSerial**, it's possible. Don't forget to #include **TinyPinChange** in your sketch!
Additionally, for small devices such as **ATtiny85** (Digispark), it's possible to declare **the same pin for TX and RX**.
Data direction is set by using the new **txMode()** and **rxMode()** methods.
Some examples of use cases:
-------------------------
* **half-duplex bi-directional serial port on a single wire for debuging purpose**
* **half-duplex serial port to interface with Bluetooth module**
* **half-duplex serial port to interconnect an arduino with another one**
Supported Arduinos:
------------------
* **ATmega368 (UNO)**
* **ATmega2560 (MEGA)**
* **ATtiny84 (Standalone)**
* **ATtiny85 (Standalone or Digispark)**
* **ATtiny167 (Digispark pro)**
Tip and Tricks:
--------------
Develop your project on an arduino UNO or MEGA, and then shrink it by loading the sketch in an ATtiny or Digispark (pro).
API/methods:
-----------
* The **SoftSerial** library uses the same API as the regular **SoftwareSerial** library:
* begin()
* end()
* available()
* read()
* listen()
* isListening()
* overflow()
* flush()
* Two additional methods are used to manage the serial port on a single pin:
* txMode()
* rxMode()
Design considerations:
---------------------
The **SoftSerial** library relies the **TinyPinChange** library **for the RX pin**. This one shall be included in the sketch as well.
On the arduino MEGA, as all the pins do not support "pin change interrupt", only the following pins are supported **for the RX pin**:
* 10 -> 15
* 50 -> 53
* A8 -> A15
On other devices (ATmega328, ATtiny84, ATtiny85 and ATtiny167), all the pins are usable.
Contact
-------
If you have some ideas of enhancement, please contact me by clicking on: [RC Navy](http://p.loussouarn.free.fr/contact.html).

83
hardware/digistump/avr/libraries/DigisparkSoftSerial/SoftSerial.cpp
View File

@@ -4,8 +4,8 @@ the Pin Change Interrupt Vector.
<SoftwareSerial> monopolizes the Pin Change Interrupt Vector and don't allow sharing.
With <SoftSerial>, it's possible. Don't forget to #include <TinyPinChange> in your sketch!
Additionally, for small devices such as ATtiny85 (Digispark), it's possible to declare the same pin for TX and RX.
Data direction is set by using the new txMode() and rxMode methods.
RC Navy (2012-2013): http://p.loussouarn.free.fr
Data direction is set by using the new txMode() and rxMode() methods.
RC Navy (2012-2015): http://p.loussouarn.free.fr
SoftwareSerial.cpp (formerly NewSoftSerial.cpp) -
Multi-instance software serial library for Arduino/Wiring
@@ -41,8 +41,15 @@ http://arduiniana.org.
// oscilloscope or logic analyzer. Beware: it also slightly modifies
// the bit times, so don't rely on it too much at high baud rates
#define _DEBUG 0
#define _DEBUG_PIN1 11
#define _DEBUG_PIN2 13
#define _DEBUG_PIN1 0//11
#define _DEBUG_PIN2 1//13
#define FAST_DEBUG //less intrusive
#ifndef cbi
#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
#endif
#ifndef sbi
#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
#endif
//
// Includes
//
@@ -67,46 +74,41 @@ typedef struct _DELAY_TABLE
static const DELAY_TABLE PROGMEM table[] =
{
// baud rxcenter rxintra rxstop tx
{ 115200, 1, 17, 17, 12, },
{ 57600, 10, 37, 37, 33, },
{ 38400, 25, 57, 57, 54, },
{ 31250, 31, 70, 70, 68, },
{ 28800, 34, 77, 77, 74, },
{ 19200, 54, 117, 117, 114, },
{ 14400, 74, 156, 156, 153, },
{ 9600, 114, 236, 236, 233, },
{ 115200, 0, 14, 14, 12, },
{ 57600, 5, 34, 34, 32, },
{ 38400, 15, 54, 54, 52, },
{ 31250, 23, 67, 67, 65, },/* By interpolation */
{ 28800, 26, 74, 74, 72, },/* By interpolation */
{ 19200, 44, 113, 113, 112, },
{ 14400, 74, 156, 153, 153, },/* By interpolation */
{ 9600, 114, 234, 234, 233, },
{ 4800, 233, 474, 474, 471, },
{ 2400, 471, 950, 950, 947, },
{ 1200, 947, 1902, 1902, 1899, },
{ 2400, 471, 940, 940, 945, },
{ 1200, 947, 1902, 1902, 1895, },
{ 300, 3804, 7617, 7617, 7614, },
};
const int XMIT_START_ADJUSTMENT = 5;
//PL{ table from http://digistump.com/board/index.php/topic,212.msg1214/topicseen.html#msg1214
const int XMIT_START_ADJUSTMENT = 0;
#elif F_CPU == 16500000
static const DELAY_TABLE PROGMEM table[] =
{
// baud rxcenter rxintra rxstop tx
{ 115200, 1, 18, 18, 12, },
{ 57600, 10, 38, 38, 34, },
{ 38400, 26, 59, 59, 56, },
{ 31250, 32, 72, 72, 70, },
{ 28800, 35, 79, 79, 76, },
{ 19200, 56, 121, 121, 118, },
{ 14400, 76, 161, 161, 158, },
{ 9600, 118, 243, 243, 240, },
{ 4800, 240, 489, 489, 486, },
{ 2400, 486, 980, 980, 977, },
{ 1200, 977, 1961, 1961, 1958, },
{ 115200, 0, 15, 15, 13, },
{ 57600, 3, 35, 35, 33, },
{ 38400, 12, 56, 56, 54, },
{ 31250, 32, 72, 72, 70, },/* By interpolation */
{ 28800, 35, 79, 79, 76, },/* By interpolation */
{ 19200, 52, 118, 118, 116, },
{ 14400, 76, 161, 161, 158, },/* By interpolation */
{ 9600, 118, 241, 241, 238, },
{ 4800, 240, 487, 487, 485, },
{ 2400, 486, 976, 976, 974, },
{ 1200, 977, 1961, 1961, 1956, },
{ 600, 1961, 3923, 3923, 3919, },
{ 300, 3923, 7855, 7855, 7852, },
};
const int XMIT_START_ADJUSTMENT = 5;
//PL}
const int XMIT_START_ADJUSTMENT = 0;
#elif F_CPU == 8000000
static const DELAY_TABLE table[] PROGMEM =
@@ -154,7 +156,7 @@ const int XMIT_START_ADJUSTMENT = 6;
#else
#error This version of SoftSerial supports only 20, 16 and 8MHz processors
#error This version of SoftSerial supports only 20, 16, 16.5 and 8MHz processors
#endif
@@ -171,9 +173,12 @@ volatile uint8_t SoftSerial::_receive_buffer_head = 0;
//
// This function generates a brief pulse
// for debugging or measuring on an oscilloscope.
#if _DEBUG
#if defined(FAST_DEBUG)
#define DebugPulse(a, bit) sbi(PINB, bit)
#else
inline void DebugPulse(uint8_t pin, uint8_t count)
{
#if _DEBUG
volatile uint8_t *pport = portOutputRegister(digitalPinToPort(pin));
uint8_t val = *pport;
@@ -182,9 +187,14 @@ inline void DebugPulse(uint8_t pin, uint8_t count)
*pport = val | digitalPinToBitMask(pin);
*pport = val;
}
#endif
}
#endif
#else
// no debug
inline void DebugPulse(uint8_t pin, uint8_t count)
{
}
#endif
//
// Private methods
//
@@ -369,7 +379,6 @@ SoftSerial::SoftSerial(uint8_t receivePin, uint8_t transmitPin, bool inverse_log
_buffer_overflow(false),
_inverse_logic(inverse_logic)
{
// setTX(transmitPin);
setRX(receivePin);
setTX(transmitPin);
TinyPinChange_RegisterIsr(receivePin, SoftSerial::handle_interrupt);

2
hardware/digistump/avr/libraries/DigisparkSoftSerial/SoftSerial.h
View File

@@ -3,7 +3,7 @@
the Pin Change Interrupt Vector.
<SoftwareSerial> monopolizes the Pin Change Interrupt Vector and don't allow sharing.
With <SoftSerial>, it's possible. Don't forget to #include <TinyPinChange> in your sketch!
RC Navy (2012): http://p.loussouarn.free.fr
RC Navy (2012-2015): http://p.loussouarn.free.fr
SoftwareSerial.h (formerly NewSoftSerial.h) -
Multi-instance software serial library for Arduino/Wiring

6
hardware/digistump/avr/libraries/DigisparkSoftSerial/examples/Digi_1io_SerialDbg/Digi_1io_SerialDbg.ino
View File

@@ -43,10 +43,12 @@
#define DEBUG_TX_RX_PIN 2 //Adjust here your Tx/Rx debug pin
SoftSerial MyDbgSerial(DEBUG_TX_RX_PIN, DEBUG_TX_RX_PIN, true); //true allows to connect to a regular RS232 without RS232 line driver
#define SERIAL_BAUD_RATE 57600 //Adjust here the serial rate (57600 is the higher supported rate)
void setup()
{
MyDbgSerial.begin(38400); //After MyDbgSerial.begin(), the serial port is in rxMode by default
MyDbgSerial.begin(SERIAL_BAUD_RATE); //After MyDbgSerial.begin(), the serial port is in rxMode by default
MyDbgSerial.txMode(); //Before sending a message, switch to txMode
MyDbgSerial.println(F("\nDebug enabled"));
MyDbgSerial.rxMode(); //switch to rxMode to be ready to receive some commands