switch to setup for Arduino Boards Manager

digistump-sam/libraries/DigiFi/examples/EthernetCompatible/WebClient/WebClient.ino

@@ -0,0 +1,86 @@
+/*
+  Web client
+ 
+ This sketch connects to a website (http://www.google.com)
+ using an DigiX. 
+
+ Based on example by David A. Mellis, Tom Igoe, and Adrian McEwen
+ 
+ */
+
+#include <DigiFi.h>
+
+
+// if you don't want to use DNS - though it is handeled by the WiFI module
+//so there is no size penalty for using it -
+// use the numeric IP instead of the name for the server:
+//IPAddress server(74,125,232,128);  // numeric IP for Google (no DNS)
+char server[] = "digistump.com";    // name address for Google (using DNS)
+
+// Initialize the Wifi  library (client/server/and main all in one)
+// with the IP address and port of the server 
+// that you want to connect to (port 80 is default for HTTP):
+DigiFi client;
+
+void setup() {
+ // Open serial communications and wait for port to open:
+  Serial.begin(9600);
+
+  
+//DigiX trick - since we are on serial over USB wait for character to be entered in serial terminal
+  while(!Serial.available()){
+    Serial.println("Enter any key to begin");
+    delay(1000);
+  }
+
+
+  // start the connection:
+   client.begin(9600);
+   //client.setDebug(true); 
+  //wait for module to be ready
+  while (client.ready() != 1)
+  {
+    Serial.println("Connecting to network...");
+    delay(1000);
+  }  
+  
+  
+  Serial.println("connecting...");
+
+  // if you get a connection, report back via serial:
+  if (client.connect(server, 80)) {
+    Serial.println("connected");
+    // Make a HTTP request:
+    client.println("GET /test.txt HTTP/1.1");
+    client.println("Host: www.digistump.com");
+    client.println("Connection: close");
+    client.println();
+  } 
+  else {
+    // kf you didn't get a connection to the server:
+    Serial.println("connection failed");
+  }
+  
+}
+
+void loop()
+{
+  // if there are incoming bytes available 
+  // from the server, read them and print them:
+  //while(!Serial1.available()){}
+  if (client.available()) {
+    char c = client.read();
+    Serial.print(c);
+  }
+
+  // if the server's disconnected, stop the client:
+  if (!client.connected()) {
+    Serial.println();
+    Serial.println("disconnecting.");
+    client.stop();
+
+    // do nothing forevermore:
+    while(true);
+  }
+}
+