DigistumpMirror/DigistumpArduino
1
0
Fork 0
mirror of https://github.com/digistump/DigistumpArduino.git synced 2025-11-03 21:14:46 -08:00
Code Issues Actions Packages Projects Releases Wiki Activity

added updated tinypinchange and associated libraries to support PRO

Browse Source
This commit is contained in:
Erik Tylek Kettenburg
2014-12-23 13:07:19 -08:00
parent d5fa60a1ec
commit e09b5f479b
71 changed files with 4062 additions and 331 deletions
Download Patch File Download Diff File Expand all files Collapse all files

76
hardware/digistump/avr/libraries/DigisparkSoftRcPulseIn/examples/SoftRcPulseInDebug/SoftRcPulseInDebug.ino Normal file
View File

@@ -0,0 +1,76 @@
/*
_____ ____ __ _ ____ _ _ _ _
| __ \ / __ \ | \ | | / __ \ | | | | | | | |
| |__| | | / \_| | . \ | | / / \ \ | | | | \ \ / /
| _ / | | _ | |\ \| | | |__| | | | | | \ ' /
| | \ \ | \__/ | | | \ ' | | __ | \ \/ / | |
|_| |_| \____/ |_| \__| |_| |_| \__/ |_| 2013
http://p.loussouarn.free.fr
*******************************************
* Digispark RC Debug Demo with 1 I/O *
*******************************************
This sketch demonstrates how to display received RC pulse width with a Digispark in the serial console of the arduino IDE.
by using a bi-directional serial port using a single I/O.
This approach allows to use the built-in Serial Console of the arduino IDE.
Please, note this solution requires a native RS232 port (rare today) or a RS232/USB adapter on the development PC.
To display properly the outputs in the IDE serial console, you have to:
- in the arduino IDE, select "Tools->Board->Digispark 16.0mhz - NO USB (Tiny core)"
- in the arduino IDE, select the right serial port in "Tools->Serial Port" and select the port where the debug cable is connected to.
- in the serial console, set the right baud rate (38400 in this sketch)
In this sketch, only Tx capabilty of SoftSerial is used.
Hardware Wiring:
===============
SERIAL SINGLE I/O
DEBUGGING CABLE
___________________/\__________________
/ \
____
.--------. | \
| GND |--------------------------------+---o5 \
| | 47K | | 9o |
| | .--###--' | o4 |
| DEBUG | 4.7K | | 8o |
| TX_RX |-------------------###--+--|<|------o3 | ---> To regular RS232 SubD 9 pins Male of PC
| PIN | ^ | 1N4148 | 7o | or to RS232/USB adapter
| | | '-----------o2 |
'--------' | | 6o |
ATtiny85 Single | o1 /
(Digispark) I/O |____/
SubD 9 pins
Female
*/
#include <TinyPinChange.h>
#include <SoftRcPulseIn.h>
#include <SoftSerial.h>
#define RX_AUX_GEAR_PIN 0 //Choose here the pin for the RC signal
#define DEBUG_TX_RX_PIN 1 //Adjust here your Tx/Rx debug pin (Do NOT work on Digispark PIN 5: choose another PIN)
SoftRcPulseIn RxAuxGear; //Choose a name for your RC channel signal
SoftSerial MyDbgSerial(DEBUG_TX_RX_PIN, DEBUG_TX_RX_PIN, true); //true allows to connect to a regular RS232 without RS232 line driver
void setup()
{
RxAuxGear.attach(RX_AUX_GEAR_PIN);
MyDbgSerial.begin(38400); //Do NOT forget to setup your terminal at 38400 (eg: arduino IDE serial monitor)
MyDbgSerial.txMode(); //Before sending a message, switch to txMode
MyDbgSerial.print(F("SoftRcPulseIn lib V"));MyDbgSerial.print(SoftRcPulseIn::LibTextVersionRevision());MyDbgSerial.println(F(" demo"));
}
void loop()
{
if(RxAuxGear.available())
{
MyDbgSerial.print(F("Pulse="));MyDbgSerial.println(RxAuxGear.width_us()); // Display Rx Pulse Width (in us)
}
}