fix digimouse

README.md

@@ -4,7 +4,7 @@ DigistumpArduino
 Files to add Digistump support (Digispark, Pro, DigiX) to Arduino 1.5.X (1.5.7+)
 
 
-**Binary downloads of the bundled IDE can be found here:**
+**Binary downloads of the bundled IDE can be found here:** https://github.com/digistump/DigistumpArduino/releases/tag/v1.5.8A
 
 To manually install:
 

hardware/digistump/avr/libraries/DigiMouse/DigiMouse.h

@@ -31,6 +31,10 @@ static uchar rt_usbHidReportDescriptorSize = 0;
 static const uchar *rt_usbDeviceDescriptor = NULL;
 static uchar rt_usbDeviceDescriptorSize = 0;
 
+#define MOUSEBTN_LEFT_MASK		0x01
+#define MOUSEBTN_RIGHT_MASK		0x02
+#define MOUSEBTN_MIDDLE_MASK	0x04
+
 // TODO: Work around Arduino 12 issues better.
 //#include <WConstants.h>
 //#undef int()
@@ -53,6 +57,7 @@ static unsigned char idle_rate = DIGIMOUSE_DEFAULT_REPORT_INTERVAL / 4; // in un
 static unsigned long last_report_time = 0;
 
 
+char usb_hasCommed = 0;
 
 const PROGMEM unsigned char mouse_usbHidReportDescriptor[] = { /* USB report descriptor */
 		0x05, 0x01,										 // USAGE_PAGE (Generic Desktop)
@@ -89,7 +94,7 @@ const PROGMEM unsigned char mouse_usbHidReportDescriptor[] = { /* USB report des
 
 #define USBDESCR_DEVICE					1
 
-unsigned const char usbDescrDevice[] PROGMEM = {		/* USB device descriptor */
+const unsigned char usbDescrDevice[] PROGMEM = {		/* USB device descriptor */
 		18,					/* sizeof(usbDescrDevice): length of descriptor in bytes */
 		USBDESCR_DEVICE,		/* descriptor type */
 		0x01, 0x01, /* USB version supported */
@@ -145,16 +150,18 @@ void clearMove() {
 class DigiMouseDevice {
  public:
 	DigiMouseDevice () {
-		// this timer stuff doesn't even make sense - it seems like someone got some code for Timer1
-		// and haphazardly changed the 1's in the register names to 0's, but the two timers don't work
-		// the same way, so this code doesn't do what it says at all. Is it even useful to have?
-		/* configure timer 0 for a rate of 16M5/(1024 * 256) = 62.94 Hz (~16ms) */
-		//TCCR0A = 5;			 /* timer 0 prescaler: 1024 */
 		
+	}
 
+	char isConnected()
+	{
+		return usb_hasCommed;
+	}
+
+	void begin(){
 
-		//TIMSK &= !(1<TOIE0);//interrupt off
 		cli();
+		PORTB &= ~(_BV(USB_CFG_DMINUS_BIT) | _BV(USB_CFG_DPLUS_BIT));
 		usbDeviceDisconnect();
 		_delay_ms(250);
 		usbDeviceConnect();
@@ -171,6 +178,16 @@ class DigiMouseDevice {
 		last_report_time = millis();
 	}
 
+	
+	void refresh() {
+		update();
+	}
+
+	void poll() {
+		update();
+	}
+
+	
 	void update() {
 		usbPoll();
 		
@@ -232,6 +249,28 @@ class DigiMouseDevice {
 		last_built_report[3] = *(reinterpret_cast<unsigned char *>(&deltaS));
 	}
 
+	void move(char deltaX, char deltaY, char deltaS, char buttons) {
+		if (deltaX == -128) deltaX = -127;
+		if (deltaY == -128) deltaY = -127;
+		if (deltaS == -128) deltaS = -127;
+		last_built_report[0] = buttons;
+		last_built_report[1] = *(reinterpret_cast<unsigned char *>(&deltaX));
+		last_built_report[2] = *(reinterpret_cast<unsigned char *>(&deltaY));
+		last_built_report[3] = *(reinterpret_cast<unsigned char *>(&deltaS));
+	}
+
+	void rightClick(){
+		last_built_report[0] = MOUSEBTN_RIGHT_MASK;
+	}
+
+	void leftClick(){
+		last_built_report[0] = MOUSEBTN_RIGHT_MASK;
+	}
+	
+	void middleClick(){
+		last_built_report[0] = MOUSEBTN_RIGHT_MASK;
+	}
+	
 	void setButtons(unsigned char buttons) {
 		last_built_report[0] = buttons;
 	}
@@ -254,6 +293,7 @@ extern "C"{
 	// USB_PUBLIC uchar usbFunctionSetup
 	
 	uchar usbFunctionSetup(uchar data[8]) {
+		usb_hasCommed = 1;
 		usbRequest_t *rq = (usbRequest_t *)data;
 	
 		usbMsgPtr = reportBuffer;

hardware/digistump/avr/platform.txt

@@ -65,8 +65,8 @@ recipe.size.regex.eeprom=^(?:\.eeprom)\s+([0-9]+).*
 # AVR Uploader/Programmers tools
 # ------------------------------
 
-tools.micronucleus.cmd.path={sketchbook.path}/hardware/digistump/avr/tools/avrdude
-tools.micronucleus.cmd.path.linux={sketchbook.path}/hardware/digistump/avr/tools/avrdude
+tools.micronucleus.cmd.path={runtime.ide.path}/hardware/digistump/avr/tools/avrdude
+tools.micronucleus.cmd.path.linux={runtime.ide.path}/hardware/digistump/avr/tools/avrdude
 
 tools.micronucleus.upload.params.verbose=-v
 tools.micronucleus.upload.params.quiet=-q

hardware/digistump/avr/variants/pro/pins_arduino.h

@@ -33,7 +33,7 @@
 
 #define NUM_DIGITAL_PINS            14
 #define NUM_ANALOG_INPUTS           10
-#define analogInputToDigitalPin(p)  ((p < 7) ? p+6 : (p ==7) ? 5 : (p==9) ? 4 : (p==10) ? 13 : -1)
+#define analogInputToDigitalPin(p)  ((p == 3) ? 23 : (p == 5) ? 21 : (p < 13 && p > 5) ? p+14 : (p ==13) ? 24 : -1)
 
 #define digitalPinHasPWM(p)         ((p) == 0 || (p) == 1)
 
@@ -46,7 +46,7 @@ static const uint8_t SDA = 0;
 static const uint8_t SCL = 2;
 
 //Ax constants cannot be used for digitalRead/digitalWrite/analogWrite functions, only analogRead().
-static const uint8_t A4 = NUM_DIGITAL_PINS+9;
+static const uint8_t A3 = NUM_DIGITAL_PINS+9;
 static const uint8_t A5 = NUM_DIGITAL_PINS+7;
 static const uint8_t A6 = NUM_DIGITAL_PINS+0;
 static const uint8_t A7 = NUM_DIGITAL_PINS+1;
@@ -108,9 +108,9 @@ static const uint8_t A13 = NUM_DIGITAL_PINS+10;
 
 
 #define digitalPinToPCICR(p)     (&PCIFR) 
-#define digitalPinToPCICRbit(p) (((p) >= 3 && (p) <= 10) ? 4 : 5)
-#define digitalPinToPCMSK(p)    (((p) >= 3 && (p) <= 10) ? (&PCMSK0) : (((p) >= 0 && (p) <= 2) ? (&PCMSK1) : ((uint8_t *)NULL)))
-#define digitalPinToPCMSKbit(p) (((p) >= 3 && (p) <= 10) ? (10 - (p)) : (p))
+#define digitalPinToPCICRbit(p) (((p) >= 6 && (p) <= 13) ? PCIE0 : PCIE1)
+#define digitalPinToPCMSK(p)    (((p) >= 6 && (p) <= 13) ? (&PCMSK0) : (&PCMSK1))
+#define digitalPinToPCMSKbit(p) (((p) >= 6 && (p) <= 13) ? ((p) - 6) : (((p) >= 0 && (p) <= 3) ? (p) : ((p) + 2)))
 
 #ifdef ARDUINO_MAIN
 
@@ -174,7 +174,7 @@ const uint8_t PROGMEM digital_pin_to_port_PGM[] =
 	PA, /* 10 */
 	PA,
 	PA,
-	PB, /* 15 */
+	PB, /* RESET */
 };
 
 const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = 
@@ -182,8 +182,8 @@ const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] =
 	_BV(0), /* 0 */
 	_BV(1),
 	_BV(2), /* 2 */
-	_BV(3), /* 3 */
-	_BV(6), /* 4 */
+	_BV(6), /* 3 */
+	_BV(3), /* 4 */
 	_BV(7),
 	_BV(0),
 	_BV(1),

hardware/digistump/avr/variants/pro32buffer/pins_arduino.h

@@ -33,7 +33,7 @@
 
 #define NUM_DIGITAL_PINS            14
 #define NUM_ANALOG_INPUTS           10
-#define analogInputToDigitalPin(p)  ((p < 7) ? p+6 : (p ==7) ? 5 : (p==9) ? 4 : (p==10) ? 13 : -1)
+#define analogInputToDigitalPin(p)  ((p == 3) ? 23 : (p == 5) ? 21 : (p < 13 && p > 5) ? p+14 : (p ==13) ? 24 : -1)
 
 #define digitalPinHasPWM(p)         ((p) == 0 || (p) == 1)
 
@@ -46,7 +46,7 @@ static const uint8_t SDA = 0;
 static const uint8_t SCL = 2;
 
 //Ax constants cannot be used for digitalRead/digitalWrite/analogWrite functions, only analogRead().
-static const uint8_t A4 = NUM_DIGITAL_PINS+9;
+static const uint8_t A3 = NUM_DIGITAL_PINS+9;
 static const uint8_t A5 = NUM_DIGITAL_PINS+7;
 static const uint8_t A6 = NUM_DIGITAL_PINS+0;
 static const uint8_t A7 = NUM_DIGITAL_PINS+1;
@@ -108,9 +108,9 @@ static const uint8_t A13 = NUM_DIGITAL_PINS+10;
 
 
 #define digitalPinToPCICR(p)     (&PCIFR) 
-#define digitalPinToPCICRbit(p) (((p) >= 3 && (p) <= 10) ? 4 : 5)
-#define digitalPinToPCMSK(p)    (((p) >= 3 && (p) <= 10) ? (&PCMSK0) : (((p) >= 0 && (p) <= 2) ? (&PCMSK1) : ((uint8_t *)NULL)))
-#define digitalPinToPCMSKbit(p) (((p) >= 3 && (p) <= 10) ? (10 - (p)) : (p))
+#define digitalPinToPCICRbit(p) (((p) >= 6 && (p) <= 13) ? PCIE0 : PCIE1)
+#define digitalPinToPCMSK(p)    (((p) >= 6 && (p) <= 13) ? (&PCMSK0) : (&PCMSK1))
+#define digitalPinToPCMSKbit(p) (((p) >= 6 && (p) <= 13) ? ((p) - 6) : (((p) >= 0 && (p) <= 3) ? (p) : ((p) + 2)))
 
 #ifdef ARDUINO_MAIN
 
@@ -174,7 +174,7 @@ const uint8_t PROGMEM digital_pin_to_port_PGM[] =
 	PA, /* 10 */
 	PA,
 	PA,
-	PB, /* 15 */
+	PB, /* RESET */
 };
 
 const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = 
@@ -182,8 +182,8 @@ const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] =
 	_BV(0), /* 0 */
 	_BV(1),
 	_BV(2), /* 2 */
-	_BV(3), /* 3 */
-	_BV(6), /* 4 */
+	_BV(6), /* 3 */
+	_BV(3), /* 4 */
 	_BV(7),
 	_BV(0),
 	_BV(1),

hardware/digistump/avr/variants/pro64buffer/pins_arduino.h

@@ -33,7 +33,7 @@
 
 #define NUM_DIGITAL_PINS            14
 #define NUM_ANALOG_INPUTS           10
-#define analogInputToDigitalPin(p)  ((p < 7) ? p+6 : (p ==7) ? 5 : (p==9) ? 4 : (p==10) ? 13 : -1)
+#define analogInputToDigitalPin(p)  ((p == 3) ? 23 : (p == 5) ? 21 : (p < 13 && p > 5) ? p+14 : (p ==13) ? 24 : -1)
 
 #define digitalPinHasPWM(p)         ((p) == 0 || (p) == 1)
 
@@ -46,7 +46,7 @@ static const uint8_t SDA = 0;
 static const uint8_t SCL = 2;
 
 //Ax constants cannot be used for digitalRead/digitalWrite/analogWrite functions, only analogRead().
-static const uint8_t A4 = NUM_DIGITAL_PINS+9;
+static const uint8_t A3 = NUM_DIGITAL_PINS+9;
 static const uint8_t A5 = NUM_DIGITAL_PINS+7;
 static const uint8_t A6 = NUM_DIGITAL_PINS+0;
 static const uint8_t A7 = NUM_DIGITAL_PINS+1;
@@ -108,9 +108,9 @@ static const uint8_t A13 = NUM_DIGITAL_PINS+10;
 
 
 #define digitalPinToPCICR(p)     (&PCIFR) 
-#define digitalPinToPCICRbit(p) (((p) >= 3 && (p) <= 10) ? 4 : 5)
-#define digitalPinToPCMSK(p)    (((p) >= 3 && (p) <= 10) ? (&PCMSK0) : (((p) >= 0 && (p) <= 2) ? (&PCMSK1) : ((uint8_t *)NULL)))
-#define digitalPinToPCMSKbit(p) (((p) >= 3 && (p) <= 10) ? (10 - (p)) : (p))
+#define digitalPinToPCICRbit(p) (((p) >= 6 && (p) <= 13) ? PCIE0 : PCIE1)
+#define digitalPinToPCMSK(p)    (((p) >= 6 && (p) <= 13) ? (&PCMSK0) : (&PCMSK1))
+#define digitalPinToPCMSKbit(p) (((p) >= 6 && (p) <= 13) ? ((p) - 6) : (((p) >= 0 && (p) <= 3) ? (p) : ((p) + 2)))
 
 #ifdef ARDUINO_MAIN
 
@@ -174,7 +174,7 @@ const uint8_t PROGMEM digital_pin_to_port_PGM[] =
 	PA, /* 10 */
 	PA,
 	PA,
-	PB, /* 15 */
+	PB, /* RESET */
 };
 
 const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = 
@@ -182,8 +182,8 @@ const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] =
 	_BV(0), /* 0 */
 	_BV(1),
 	_BV(2), /* 2 */
-	_BV(3), /* 3 */
-	_BV(6), /* 4 */
+	_BV(6), /* 3 */
+	_BV(3), /* 4 */
 	_BV(7),
 	_BV(0),
 	_BV(1),