SoftRcPulseOut library
======================

**SoftRcPulseOut** is pseudo-asynchronous library designed to generate RC pulse signals. RC pulse signals are intended to command servos, **E**lectronic **S**peed **C**ontrollers (**ESC**), Brushless Controllers and any devices expecting such a command signal.

Some examples of use cases:
-------------------------
* **Servo/ESC/Brushless Controller tester**
* **Servo sequencer** (look at RcSeq library which uses _SoftRcPulseOut_)
* **Robot wheels using modified Servo to support 360° rotation**
* **RC pulse stretcher** (in conjunction with **SoftRcPulseIn** library)

Supported Arduinos:
------------------
* **ATmega368 (UNO)**
* **ATmega2560 (MEGA)**
* **ATtiny84 (Standalone)**
* **ATtiny85 (Standalone or Digispark)**
* **ATtiny167 (Digispark pro)**

Tip and Tricks:
--------------
Develop your project on an arduino UNO or MEGA, and then shrink it by loading the sketch in an ATtiny or Digispark (pro).

API/methods:
-----------
* The **SoftRcPulseOut** library uses the same API as the regular **SoftwareServo** library:
	* attach()
	* attached()
	* detach()
	* write()
	* read()
	* setMinimumPulse()
	* setMaximumPulse()
	* refresh()

* Two additional methods allow using µs rather than angle in ° :
	* write_us()
	* read_us()

* Methods for version management:
	* LibVersion
	* LibRevision
	* LibTextVersionRevision

* Synchronization:
	* By giving **_1_** or **_true_** as optional argument for the **SoftRcPulseOut::refresh()** method, the pulses are refreshed immediately (without waiting for the usual 20ms).

	* the **SoftRcPulseOut::refresh()** method returns **_1_** or **_true_** when the pulses have been refreshed. Testing this return value provides a 20ms timer.

Design considerations:
---------------------
The **SoftRcPulseOut** library relies on a 8 bit timer. This allows using it even on little MCU (such as ATtiny85) which do not have any 16 bit timer.

Whereas a 8 bit timer is used for pulse generation, the jitter is limited by using anticipated interrupt masking.

Interrups are only masked during rising and falling edges of the pulse signals.

CAUTION:
-------
The end user shall also use asynchronous programmation method in the loop() function (not too long blocking functions such as delay(1000): the **SoftRcPulseOut::refresh()** method shall be called at least every 50ms).

Contact
-------

If you have some ideas of enhancement, please contact me by clicking on: [RC Navy](http://p.loussouarn.free.fr/contact.html).