DigistumpMirror/DigistumpArduino
1
0
Fork 0
mirror of https://github.com/digistump/DigistumpArduino.git synced 2025-04-27 15:19:02 -07:00
Code Issues Actions Packages Projects Releases Wiki Activity

Switch to Arduino-compliant EEPROM library

Browse Source
This commit is contained in:
SukkoPera 2016-06-04 15:21:46 +02:00
parent b9a79d8b2e
commit d457051fd4
3 changed files with 203 additions and 309 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

179
digistump-sam/libraries/DigiXEEPROM/Extensive_EEPROM.h
View File

@ -1,179 +0,0 @@
/*
Extensive TWI/I2C EEPROM Library - for 24LCxxx devices
version: 0.4.1
target device: Microchip 24LC256 or similar
compatibility: designed with Arduino Due
-> Ver. 0.4.1: Successfully tested with Arduino Uno R3 and Arduino Micro!
author: Dennis Schweer (Inglorious Engineer)
license: CC BY-SA 3.0 (http://creativecommons.org/licenses/by-sa/3.0/deed.en)
Overview:
-bytewise reading/writing
void extEEPROMwrite(int chip_address, int address, byte value);
byte extEEPROMread(int chip_address, int address);
-pagewise reading/writing
void extEEPROMwritePage(int chip_address, int startaddress, byte* data_origin_array, int amount_of_transfered_bytes)
(!!!ATTENTION!!!: Limited to 30 Bytes only!)
void extEEPROMreadPage(int chip_address, int startaddress, byte* data_target_array, int amount_of_transfered_bytes)
(!!!ATTENTION!!!: Limited to 32 Bytes only)
Do not care about their size, just save them!
-read/write complete 32bit integers [Requires four bytes of your EEPROM.]
void extEEPROMwriteInt(int chip_address, int address, int data_to_be_stored)
int extEEPROMreadInt(int chip_address, int address)
-read/write your 10/12 bit sensor values (e.g., ADC values) [Requires two bytes of your EEPROM.]
void extEEPROMwriteSensor(int chip_address, int addresse, int data_to_be_stored)
int extEEPROMreadSensor(int chip_address, int addresse)
NEW IN VERSION 0.4:
Now all functions include a device address parameter, allowing you to use two
or more external EEPROM chips simultaneously on a single bus. Just choose the
right device addresses and feet them into the library functions!
NEW IN VERSION 0.4.1:
My library is designed with an Arduino Due, but now everything is successfully
tested to work on Arduino Uno R3 and Arduino Micro as well! Since all current
Arduinos are based on either ATmega328 (e.g., Uno), ATmega32U4 (e.g., Micro/
Leonardo/Esplora) or ATSAM3X8E (Due), my library should work with ALL official
or 1:1-compatible boards.
!!! Unfortunately, Arduino Due appears to be the only device with the ability
to handle 32 bit integers. Hence none of my "writeInt" / "readInt" functions
run on 8-bit Arduinos !!!
Planned for future releases:
-erase byte
-erase page
-erase complete EEPROM
-read/write with autocorrection of "startaddress"-value
*/
#include "Arduino.h"
//========FUNCTIONS=========================
///////////////// WRITE /////////////////////
void extEEPROMwrite(int EEPROM_addr, int addr, byte data)
{
Wire.beginTransmission(EEPROM_addr); //Start transmission to EEPROM
Wire.write(highByte(addr)); // send high byte of address
Wire.write(lowByte(addr)); // send low byte of address
Wire.write((byte) data); // send data
Wire.endTransmission(true); // stop transmitting
delay(6); // wait for a successful write
}
void extEEPROMwritePage(int EEPROM_addr, int addr, byte* data_origin, int amount)
{
Wire.beginTransmission(EEPROM_addr); //Start transmission to EEPROM
Wire.write(highByte(addr)); // send high byte of address
Wire.write(lowByte(addr)); // send low byte of address
for(int i = 0; i<amount; i++) //write array into EEPROM
{
Wire.write((byte) data_origin[i]);
}
Wire.endTransmission(true); // stop transmitting
delay(6); // wait for a successful write
}
void extEEPROMwriteInt(int EEPROM_addr, int addr, int data)
{
Wire.beginTransmission(EEPROM_addr); //Start transmission to EEPROM
Wire.write(highByte(addr)); // send high byte of address
Wire.write(lowByte(addr)); // send low byte of address
Wire.write(lowByte(data)); // send lowest byte of 32 bit integer
data = data >> 8;
Wire.write(lowByte(data)); // send 2nd lowest byte of 32 bit integer
data = data >> 8;
Wire.write(lowByte(data)); // send 2nd highest byte of 32 bit integer
data = data >> 8;
Wire.write(lowByte(data)); // send highest byte of 32 bit integer
Wire.endTransmission(true); // stop transmitting
delay(6); // wait for a successful write
}
void extEEPROMwriteSensor(int EEPROM_addr, int addr, int data)
{
Wire.beginTransmission(EEPROM_addr); //Start transmission to EEPROM
Wire.write(highByte(addr)); // send high byte of address
Wire.write(lowByte(addr)); // send low byte of address
Wire.write(lowByte(data)); // send low byte of 12 bit integer
data = data >> 8;
Wire.write(lowByte(data)); // send high byte of 12 bit integer
Wire.endTransmission(true); // stop transmitting
delay(6); // wait for a successful write
}
///////////////// READ /////////////////////
byte extEEPROMread(int EEPROM_addr, int addr)
{
Wire.beginTransmission(EEPROM_addr); //Start transmission to EEPROM
Wire.write(highByte(addr)); // send high byte of address
Wire.write(lowByte(addr)); // send low byte of address
Wire.endTransmission(true); // stop transmitting
Wire.requestFrom(EEPROM_addr, 0x01, true); // request 1 byte form the device attached to EEPROM_addr
byte data_out = 64;
// read that byte
while(Wire.available() == 0) {} // wait for data
data_out = Wire.read(); //read single byte
return data_out;
}
void extEEPROMreadPage(int EEPROM_addr, int addr, byte* data_target, int amount)
{
Wire.beginTransmission(EEPROM_addr); //Start transmission to EEPROM
Wire.write(highByte(addr)); // send high byte of address
Wire.write(lowByte(addr)); // send low byte of address
Wire.endTransmission(true); // stop transmitting
Wire.requestFrom(EEPROM_addr, amount, true); // request 1 byte form the device attached to EEPROM_addr
// read that byte
while(Wire.available() == 0) {} // wait for data
for(int i = 0; i<amount; i++) //write data into array
{
data_target[i] = Wire.read();
}
}
int extEEPROMreadInt(int EEPROM_addr, int addr)
{
Wire.beginTransmission(EEPROM_addr); //Start transmission to EEPROM
Wire.write(highByte(addr)); // send high byte of address
Wire.write(lowByte(addr)); // send low byte of address
Wire.endTransmission(true); // stop transmitting
Wire.requestFrom(EEPROM_addr, 0x04, true); // request 1 byte form the device attached to EEPROM_addr
int data_out = 0xDEADBEEF;
int temp = 0xDEADBEEF;
// read that byte
while(Wire.available() == 0) {} // wait for data
data_out = Wire.read(); //read single byte
//reconstruct value
temp = Wire.read();
temp = temp << 8;
data_out = data_out | temp;
temp = Wire.read();
temp = temp << 16;
data_out = data_out | temp;
temp = Wire.read();
temp = temp << 24;
data_out = data_out | temp;
return data_out;
}
int extEEPROMreadSensor(int EEPROM_addr, int addr)
{
Wire.beginTransmission(EEPROM_addr); //Start transmission to EEPROM
Wire.write(highByte(addr)); // send high byte of address
Wire.write(lowByte(addr)); // send low byte of address
Wire.endTransmission(true); // stop transmitting
Wire.requestFrom(EEPROM_addr, 0x04, true); // request 1 byte form the device attached to EEPROM_addr
int data_out = 0xDEAD;
int temp = 0xBEEF;
// read that byte
while(Wire.available() == 0) {} // wait for data
data_out = Wire.read(); //read single byte
//reconstruct value
temp = Wire.read();
temp = temp << 8;
data_out = data_out | temp;
return data_out;
}

130
digistump-sam/libraries/DigiXEEPROM/Extensive_EEPROM_overview/Extensive_EEPROM_overview.ino
View File

@ -1,130 +0,0 @@
/*
Extensive TWI/I2C EEPROM Library - for 24LCxxx devices
version: 0.4.1
target device: Microchip 24LC256 or similar
compatibility: designed with Arduino Due
-> Ver. 0.4.1: Successfully tested with Arduino Uno R3 and Arduino Micro!
author: Dennis Schweer (Inglorious Engineer)
license: CC BY-SA 3.0 (http://creativecommons.org/licenses/by-sa/3.0/deed.en)
Overview:
-bytewise reading/writing
void extEEPROMwrite(int chip_address, int address, byte value);
byte extEEPROMread(int chip_address, int address);
-pagewise reading/writing
void extEEPROMwritePage(int chip_address, int startaddress, byte* data_origin_array, int amount_of_transfered_bytes)
(!!!ATTENTION!!!: Limited to 30 Bytes only!)
void extEEPROMreadPage(int chip_address, int startaddress, byte* data_target_array, int amount_of_transfered_bytes)
(!!!ATTENTION!!!: Limited to 32 Bytes only)
Do not care about their size, just save them!
-read/write complete 32bit integers [Requires four bytes of your EEPROM.]
void extEEPROMwriteInt(int chip_address, int address, int data_to_be_stored)
int extEEPROMreadInt(int chip_address, int address)
-read/write your 10/12 bit sensor values (e.g., ADC values) [Requires two bytes of your EEPROM.]
void extEEPROMwriteSensor(int chip_address, int addresse, int data_to_be_stored)
int extEEPROMreadSensor(int chip_address, int addresse)
NEW IN VERSION 0.4:
Now all functions include a device address parameter, allowing you to use two
or more external EEPROM chips simultaneously on a single bus. Just choose the
right device addresses and feet them into the library functions!
NEW IN VERSION 0.4.1:
My library is designed with an Arduino Due, but now everything is successfully
tested to work on Arduino Uno R3 and Arduino Micro as well! Since all current
Arduinos are based on either ATmega328 (e.g., Uno), ATmega32U4 (e.g., Micro/
Leonardo/Esplora) or ATSAM3X8E (Due), my library should work with ALL official
or 1:1-compatible boards.
!!! Unfortunately, Arduino Due appears to be the only device with the ability
to handle 32 bit integers. Hence none of my "writeInt" / "readInt" functions
run on 8-bit Arduinos !!!
Planned for future releases:
-erase byte
-erase page
-erase complete EEPROM
-read/write with autocorrection of "startaddress"-value
*/
#include <Wire.h>
#include <Extensive_EEPROM.h>
const int EEPROM_addr = 0x50;
// Testbed variables
int test = 1;
void setup()
{
Wire.begin(); // join i2c bus (address optional for master)
Serial.begin(9600);
test = 1;
}
void loop()
{
//Testbed
if(test == 1) //only run it once
{
//byte-wise writing/reading
Serial.println("//byte-wise writing/reading");
for(int i = 0; i < 32; i++)
{
extEEPROMwrite(EEPROM_addr, i, i); //void extEEPROMwrite(int chip_address, int address, byte value);
}
int data_back;
for(int i = 0; i < 32; i++)
{
data_back = extEEPROMread(EEPROM_addr, i); //byte extEEPROMread(int chip_address, int address);
Serial.print("original data= ");
Serial.print(i);
Serial.print(" read_back= ");
Serial.println(data_back);
}
//page-wise writing/reading
Serial.println("//page-wise writing/reading");
byte data_to_be_written[30];
for(int i=0; i<30; i++)
{
data_to_be_written[i] = (29-i); //writes the numbers 29 downto 0 into cells 0-29
Serial.print("Original Data = ");
Serial.println((29-i));
}
//store array in EEPROM (max. 30 Bytes)
extEEPROMwritePage(EEPROM_addr, 32, data_to_be_written, 30); //void extEEPROMwritePage(int chip_address, int startaddress, byte* data_origin_array, int amount_of_transfered_bytes)
//read page into an array (max. 32 Bytes)
byte data_output[30];
extEEPROMreadPage(EEPROM_addr, 32, data_output, 30); // void extEEPROMreadPage(int chip_address, int startaddress, byte* data_target_array, int amountof_transfered_bytes)
for(int j=0; j<30; j++)
{
Serial.print("Read Page= ");
Serial.println(data_output[j]); // Print array
}
//write/read 32 bit integer
Serial.println("//write/read 32 bit integer");
int original_int = 0x7FFFFFFF;
extEEPROMwriteInt(EEPROM_addr, 70, original_int);
int original_int_output;
original_int_output = extEEPROMreadInt(EEPROM_addr, 70);
Serial.print("Integer: in = ");
Serial.print(original_int);
Serial.print(" / out = ");
Serial.println(original_int_output);
//write/read 10/12 bit sensor data
Serial.println("//write/read 10/12 bit sensor data");
int original_sensor = 0x7FFF;
extEEPROMwriteInt(EEPROM_addr, 75, original_sensor);
int original_sensor_output;
original_sensor_output = extEEPROMreadInt(EEPROM_addr, 75);
Serial.print("Sensordata: in = ");
Serial.print(original_sensor);
Serial.print(" / out = ");
Serial.println(original_sensor_output);
}
test = 2; // only perform this procedure once
}

203
digistump-sam/libraries/EEPROM/EEPROM.h Normal file
View File

@ -0,0 +1,203 @@
/*
EEPROM.h - EEPROM library for the Digistump DigiX
This is mostly the merger of the stock Arduino EEPROM library, original
Copyright (c) 2006 David A. Mellis/Christopher Andrews 2015 (LGPL 2.1) with a
few functions from Dennis Schweer (Inglorious Engineer)'s Extensive TWI/I2C
EEPROM Library for 24LCxxx devices v0.4.1 (CC-BY-SA), as distributed with the
DigiX core.
Merging work by SukkoPera <software@sukkology.net>, 2016.
The basic idea is to create a library that is interface-compatible with
Arduino's stock library that is used on non-Due boards, to achieve
compatibility at source level, so that the usual EEPROM.write()/read()/get()
/put() calls can be used.
I'm not really sure of what license the resulting code should be released
under, so I'm leaving the LGPL 2.1, as most of the code here actually came
under that license, and the rest is pretty basic stuff, but let me know if I
should change that.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef EEPROM_h
#define EEPROM_h
#include <inttypes.h>
#include <Wire.h>
static const int DIGIX_EEPROM_ADDR = 0x50;
static const int E2END = 0xFFF;
/***
EERef class.
This object references an EEPROM cell.
Its purpose is to mimic a typical byte of RAM, however its storage is the EEPROM.
This class has an overhead of two bytes, similar to storing a pointer to an EEPROM cell.
***/
struct EERef{
private:
void extEEPROMwrite(int EEPROM_addr, int addr, byte data)
{
Wire.beginTransmission(EEPROM_addr); //Start transmission to EEPROM
Wire.write(highByte(addr)); // send high byte of address
Wire.write(lowByte(addr)); // send low byte of address
Wire.write((byte) data); // send data
Wire.endTransmission(true); // stop transmitting
delay(6); // wait for a successful write
}
byte extEEPROMread(int EEPROM_addr, int addr) const
{
Wire.beginTransmission(EEPROM_addr); //Start transmission to EEPROM
Wire.write(highByte(addr)); // send high byte of address
Wire.write(lowByte(addr)); // send low byte of address
Wire.endTransmission(true); // stop transmitting
Wire.requestFrom(EEPROM_addr, 0x01, true); // request 1 byte form the device attached to EEPROM_addr
byte data_out = 64;
// read that byte
while(Wire.available() == 0) {} // wait for data
data_out = Wire.read(); //read single byte
return data_out;
}
public:
EERef( const int index )
: index( index ) {}
//Access/read members.
uint8_t operator*() const { return extEEPROMread( DIGIX_EEPROM_ADDR, index ); }
operator const uint8_t() const { return **this; }
//Assignment/write members.
EERef &operator=( const EERef &ref ) { return *this = *ref; }
EERef &operator=( uint8_t in ) { return extEEPROMwrite( DIGIX_EEPROM_ADDR, index, in ), *this; }
EERef &operator +=( uint8_t in ) { return *this = **this + in; }
EERef &operator -=( uint8_t in ) { return *this = **this - in; }
EERef &operator *=( uint8_t in ) { return *this = **this * in; }
EERef &operator /=( uint8_t in ) { return *this = **this / in; }
EERef &operator ^=( uint8_t in ) { return *this = **this ^ in; }
EERef &operator %=( uint8_t in ) { return *this = **this % in; }
EERef &operator &=( uint8_t in ) { return *this = **this & in; }
EERef &operator |=( uint8_t in ) { return *this = **this | in; }
EERef &operator <<=( uint8_t in ) { return *this = **this << in; }
EERef &operator >>=( uint8_t in ) { return *this = **this >> in; }
EERef &update( uint8_t in ) { return in != *this ? *this = in : *this; }
/** Prefix increment/decrement **/
EERef& operator++() { return *this += 1; }
EERef& operator--() { return *this -= 1; }
/** Postfix increment/decrement **/
uint8_t operator++ (int){
uint8_t ret = **this;
return ++(*this), ret;
}
uint8_t operator-- (int){
uint8_t ret = **this;
return --(*this), ret;
}
int index; //Index of current EEPROM cell.
};
/***
EEPtr class.
This object is a bidirectional pointer to EEPROM cells represented by EERef objects.
Just like a normal pointer type, this can be dereferenced and repositioned using
increment/decrement operators.
***/
struct EEPtr{
EEPtr( const int index )
: index( index ) {}
operator const int() const { return index; }
EEPtr &operator=( int in ) { return index = in, *this; }
//Iterator functionality.
bool operator!=( const EEPtr &ptr ) { return index != ptr.index; }
EERef operator*() { return index; }
/** Prefix & Postfix increment/decrement **/
EEPtr& operator++() { return ++index, *this; }
EEPtr& operator--() { return --index, *this; }
EEPtr operator++ (int) { return index++; }
EEPtr operator-- (int) { return index--; }
int index; //Index of current EEPROM cell.
};
/***
EEPROMClass class.
This object represents the entire EEPROM space.
It wraps the functionality of EEPtr and EERef into a basic interface.
This class is also 100% backwards compatible with earlier Arduino core releases.
***/
struct EEPROMClass{
boolean inited;
// c'tor
EEPROMClass () { inited = false; }
// Check if the i2c library was initialized, and do it if not.
// FIXME: What happens if the sketch has already called Wire.begin() on its
// own?
void checkInited () { if (!inited) { Wire.begin(); inited = true; } }
//Basic user access methods.
EERef operator[]( const int idx ) { return idx; }
uint8_t read( int idx ) { checkInited (); return EERef( idx ); }
void write( int idx, uint8_t val ) { checkInited (); (EERef( idx )) = val; }
void update( int idx, uint8_t val ) { checkInited (); EERef( idx ).update( val ); }
//STL and C++11 iteration capability.
EEPtr begin() { return 0x00; }
EEPtr end() { return length(); } //Standards requires this to be the item after the last valid entry. The returned pointer is invalid.
uint16_t length() { return E2END + 1; }
//Functionality to 'get' and 'put' objects to and from EEPROM.
template< typename T > T &get( int idx, T &t ){
checkInited ();
EEPtr e = idx;
uint8_t *ptr = (uint8_t*) &t;
for( int count = sizeof(T) ; count ; --count, ++e ) *ptr++ = *e;
return t;
}
template< typename T > const T &put( int idx, const T &t ){
checkInited ();
EEPtr e = idx;
const uint8_t *ptr = (const uint8_t*) &t;
for( int count = sizeof(T) ; count ; --count, ++e ) (*e).update( *ptr++ );
return t;
}
};
static EEPROMClass EEPROM;
#endif